Comdial FX Series Especificações descarregar pdf (Página 154)

calling where a remote extension is the same digits as an office or area code that installers need to

enter in the restriction table. By entering nnn pause for tie line access and nnn@ for CO line access,

the system can route the call over the proper line. A third application is brought forth with the advent

of the new North American Numbering Plan (NANP). With NANP, an area code may be the same

digits as a local office code. Installers can enter nnn@@@@ pause for local line access and

nnn@@@@@@@ for long distance line access (the @ is a match anything character). In any

application, the system resets its pause timer after receiving each caller dialed digit. If the timer

expires before the caller dials another digit, the system routes the call based on the digits preceding

the pause. If, instead, the system detects more digits instead of a pause, it routes the call based on the

entire digit string.

Tone on Hold

This feature gives you an alternative to providing music or no music for callers who are placed on

hold.

When you program this feature into the FX II, both internal and external callers hear a pattern of

short tone bursts while they are on hold. The patterns consist of two 1/10-second tone bursts

separated by 1/10-second. These tone patterns repeat every five seconds.

The installer enables this feature and assigns it to particular lines through line programming or

stations through class of service programming using the PC. The system manager can also select this

feature from the applicable class of service from a programming station for intercom calls placed on

hold. The choices when programming this feature are: music from source one, music from source 2,

tone on hold, or nothing.

Tone or Voice Signaling on Internal Calls

Intercom number calls can be tone signaled or voice signaled as desired. Programming determines

which signaling method the system uses as the primary method when an intercom number call is

made. Users can choose the alternate method at the station by pressing the intercom key. Intercom

number call progress is marked by special tone signals.

Tracker Paging System

The Tracker Paging System interfaces a FX II with individual Tracker pagers. The Tracker Paging

System informs users through their Tracker pagers that they have a call waiting for them. The

Tracker base station connects to any of the FX II’s serial ports or to the PC Attendant position. The

FX II can accept up to four Tracker base stations supporting up to 600 Tracker pagers. Many

different types of Tracker pagers are supported—from those with numeric displays to those that

display a pre-programmed message up to 32 alphanumeric characters long.

Creating Messages from the PC Attendant

Up to eight default messages can be programmed and delivered from the PC Attendant position only

(see the Digital Communications System PC Attendant’s Console User’s Guide, GCA70–230 for

instructions). The PC attendant can be in either the Local or the System mode of operation.

150 – Understanding the Features

GCA40–242 General Description

1 2 ... 149 150 151 152 153 154 155 156 157 158 159 ... 171 172

Sem comentários

Comdial FX Series Especificações Página 154